Accessories

The Phoenix Charger Control panel provides remote control and monitoring of the charge process with LED indication of the charger status. In additi...

VE.Bus to BMS 12-200 alternator control cable

The Skylla-i Control allows you to alter the charge current and see the system status.

A remote on-off switch for the Skylla-TG Charger.

This panel is intended for Inverters equipped with a UTP remote monitoring and control socket. It can also be used on a MultiPlus Inverter/Charger ...

The Skylla Control allows you to alter the charge current and see the system status.

The GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for Victron's range of GX system monitoring products, of whic...

This panel is intended both for MultiPlus and Quattro inverter chargers. It allows PowerControl and PowerAssist current limit setting for two AC so...

Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment. We offer a number o...

The Lynx Power In contains a negative and positive DC bus-bar with M8 bolts in which to connect battery cables. It has 4 studs for battery leads, p...

The Lynx Distributor is a modular positive and negative DC busbar with locations for four DC Mega Fuses. It will monitor the status of each fuse, a...

Use this cable to connect the following products to the VE.Bus BMS to all models of the Skylla-TG Charger.The cable translates the remote on/off dr...

The Victron Energy VE.Direct Cable is a high-quality, durable cable designed for seamless communication between Victron Energy devices. Whether you...

Use this cable to connect a CAN-bus enabled battery, not from Victron, to a Victron system. There are two types, A and B. See the manual for detail...

A cable to connect Digital Multi Control, Phoenix Inverter Control, Interface MK3-USB, VE.Bus connections between multiple VE.Bus devices and to ma...

The Lynx Shunt VE.Can is an intelligent 1000A shunt with a location for an ANL fuse (not included). The built-in battery monitor accurately monitor...

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. Designed to integrate seamlessly with the Lynx Dis...

In the Orion-Tr Isolated DC-DC Chargers the remote on/off circuit is referenced to the primary battery (e.g. starter battery). The Orion-Tr DC-DC C...

This cable can be used to extend the BMS communication cables between a Lithium Battery Smart and the BMS. It ships in a bag of 2 pieces and is a...

Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that fea...

Spare battery temperature sensor for Victron Energy's Inverter RS Smart Solar.

Temperature sensor for Victron's BMV-712 Smart battery monitor. 

Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models. Note that it's not necessary to use this cable on the la...

Use the CANUSB interface to connect a VE.Can product to your computer.

VE.Can RJ45 terminators come in a bag of two when ordered separately. The terminators are also included with some products, for example with the CA...

When the CAN bus is not powered by a Skylla-I or an MPPT, use the VE.Can Power Cable to supply power.

Easily mount a Battery Monitor BMV-700 or MPPT Control on a wall. Refer to the Quick Installation Guide below for details.

Use this simple 65 x 120mm wall mount to display a Digital Multi Control 200/200A GX, a Skylla-i Control GX, or Battery Alarm GX. A short RJ45 exte...

Easily mount a BMV-700 series or MPPT Control on a wall. Refer to the Quick Installation Guide below for details. 

The MK3-USB interface connects Victron VE.Bus devices—such as the MultiPlus, MultiPlus-II, and Quattro—to a Mac, Windows PC, smartphone, or tablet ...

RS232 to USB converter - This cable converts an RS232 to USB connection. VE.Direct to RS232 interface - This cable connects a Victron product with ...

The VE.Direct TX digital output cable can be used in combination with the BlueSolar and SmartSolar MPPT chargers.

The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it...

Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect App...

Use Victron's 100A 50mA Current Transformer for a MultiPlus-II inverter charger to implement PowerControl and PowerAssist and to optimize self-cons...

The M6/M8 eyelet connector with fuse is an accessory for the Blue Smart IP65 Battery Charger with DC connector. The quick disconnect on the end of ...